Laboratory Glass F-G

Filters - Flasks - Funnels - Gas Sampling - Gas Washing

Filters
     
RG6100
FILTER, AIR SAMPLING GLASS CARTRIDGE
For use in air sampling. Supplied with stainless steel core.
 
RG6105
FILTER APPARATUS, 47mm COMPLETE
All glass unit with 300ml funnel and 1 L flask. Filter with suction flask is similar to RG6110 except with ground joint connection with flask and suction inlet on adapter.

-01 Complete with glass frit
-02 Complete with stainless steel screen
-03 Glass funnel, 300ml
-04 Fritted glass support base
-05 Stainless steel screen support base
-06 Stainless steel screen
-07 Aluminum clamp, 47mm
-08 Erlenmeyer flask, 1 L

RG6110
FILTRATION UNIT, 47mm COMPLETE
Our unit is designed for vacuum filtration of large volumes of liquid for analysis of particulate or biological contamination. They can also be used with millipore filtering manifolds. Units have coarse porosity fritted glass filter support bases, a clamp, and a 300ml glass funnel.

-01 Complete with glass frit
-02 Complete with stainless steel screen
-03 Glass funnel, 300ml
-04 Fritted glass support base
-05 Stainless steel screen support base
-06 Stainless steel screen
-07 Aluminum clamp, 47mm
-08 Silicone rubber stopper
-09 Teflon gasket (10pk) VG6168-4721
-10 #6 Neoprene stopper VG6168-4751N (250ml flask)
-11 #7 Neoprene stopper VG6168-4752N (500ml flask)
-12 #8 Neoprene stopper VG6168-4753N (1000ml flask)

 

Flasks
     
  RG6200
FLASK, BOILING ROUND BOTTOM
Single neck with 24/40 joint.

-01 50ml -04 300ml
-02 100ml -05 500ml
-03 250ml -06 1000ml
   

RG6201
FLASK, ROUND BOTTOM
with 29/42 joint.

-01 50ml -04 300ml
-02 100ml -05 500ml
-03 250ml -06 1000ml

RG6202
FLASK, RBBF, 35/25 socket joint.

-01 50ml -04 300ml
-02 100ml -05 500ml
-03 250ml -06 1000ml
 

RG6205
FLASK, BOILING FLAT BOTTOM
Single short neck, with 24/40 outer joint. Other sizes available upon request.

-01 125ml -05 1000ml
-02 250ml -06 2000ml
-03 300ml -07 3000ml
-04 500ml -08 5000ml

RG6206
FLASK, FLAT BOTTOM
with 29/42 joint.

-01 125ml -04 500ml
-02 250ml -05 1000ml
-03 300ml  
 

RG6210
FLASK, BOILING, SINGLE LONG NECK, ROUND BOTTOM
Single long neck, round bottom with 24/40 outer joint. Other sizes available upon request.

-01 50ml -06 1000ml
-02 100ml -07 2000ml
-03 250ml -08 3000ml
-04 300ml -09 5000ml
-05 500ml -10 12000ml
RG6215
FLASK, BOILING - SINGLE LONG NECK, FLAT BOTTOM
Single long neck, flat bottom with 24/40 joint.

-01 50ml -05 1000ml
-02 125ml -06 2000ml
-03 250ml -07 3000ml
-04 500ml -08 5000ml
 
RG6220
FLASK, BOILING, 2-NECKS
Round bottom with 24/40 outer on both vertical joints. Other sizes available upon request.

-01 100ml -04 1000ml
-02 250ml -05 2000ml
-03 500ml -06 5000ml
RG6221
FLASK, FLAT BOTTOM

-01 100ml -04 1000ml
-02 250ml -05 2000ml
-03 500ml -06 5000ml
 
RG6225
FLASK, BOILING, 2-NECKS
Round bottom with 24/40 side neck seals at an angle. Other sizes available upon request.

-01 100ml -04 1000ml
-02 250ml -05 2000ml
-03 500ml -06 5000ml
RG6230
FLASK, BOILING, 3-NECKS
Round bottom with vertical outer joints. Side necks have a 24/40 joint.

 
Center Neck
Joint
 
Center Neck
Joint
-01 250ml
24/40
-09 3000ml
24/40
-02 500ml
24/40
-10 3000ml
29/42
-03 1000ml
24/40
-11 3000ml
45/50
-04 1000ml
29/42
-12 5000ml
24/40
-05 1000ml
45/50
-13 5000ml
29/42
-06 2000ml
24/40
-14 5000ml
45/50
-07 2000ml
29/42
-15 12000ml
45/50
-08 2000ml
45/50
 
 
RG6235
FLASK, BOILING 3-NECKS
Round bottom with center and side joints sealed on at an angle. These flasks will accept thermometers. Side necks have a 24/40 joint.

 
Center Neck
Joint
 
Center Neck
Joint
-01 100ml
24/40
-09 3000ml
24/40
-02 250ml
24/40
-10 3000ml
29/42
-03 300ml
24/40
-11 5000ml
24/40
-04 500ml
24/40
-12 5000ml
29/42
-05 1000ml
24/40
-13 5000ml
45/50
-06 1000ml
29/42
-14 12000ml
45/50
-07 2000ml
24/40
-15 2000ml
45/50
-08 2000ml
29/42
 

RG6240
FLASK, INDENTED, MORTON STYLE, SINGLE NECK
Round bottom, indentations in side promote better agitation when contents are being stirred. 24/40 joint. Other neck sizes available.

-01 100ml -06 1000ml
-02 200ml -07 2000ml
-03 250ml -08 3000ml
-04 300ml -09 5000ml
-05 500ml  

 

 
RG6241
FLASK, INDENTED, MORTON STYLE, 3- NECKS
Round bottom, indented. Center and side necks are 180º apart. Indentations in side promote better agitation when contents are being stirred. Side necks have a 24/40 joint. Special sizes available upon request.

 
Center Neck
Joint
 
Center Neck
Joint
-01 500ml
24/40
-12 3000ml
24/40
-02 500ml
29/42
-13 3000ml
29/42
-03 500ml
34/45
-14 3000ml
34/45
-04 1000ml
24/40
-15 3000ml
45/50
-05 1000ml
29/42
-16 5000ml
24/40
-06 1000ml
34/45
-17 5000ml
29/42
-07 1000ml
45/50
-18 5000ml
34/45
-08 2000ml
24/40
-19 5000ml
45/50
-09 2000ml 29/42 -20 12000ml 34/45
-10 2000ml 34/45 -21 12000ml 45/50
-11 2000ml 45/50    
RG6242
FLASK, ROUND BOTTOM, MORTON STYLE, 3-NECKS
Same as RG6241 except side necks are inclined at 20°. Side necks have a 24/40 joint. Special sizes available upon request.

 
Center Neck
Joint
 
Center Neck
Joint
-01 500ml
24/40
-12 3000ml
24/40
-02 500ml
29/42
-13 3000ml
29/42
-03 500ml
34/45
-14 3000ml
34/45
-04 1000ml
24/40
-15 3000ml
45/50
-05 1000ml
29/42
-16 5000ml
24/40
-06 1000ml
34/45
-17 5000ml
29/42
-07 1000ml
45/50
-18 5000ml
34/45
-08 2000ml
24/40
-19 5000ml
45/50
-09 2000ml 29/42 -20 12000ml 34/45
-10 2000ml 34/45 -21 12000ml 45/50
-11 2000ml 45/50    
 

RG6245
FLASK, BOILING, 4-NECKS
Round bottom boiling flask, having one 10/30 outer joint for a thermometer. Side necks have a 24/40 joint. Special sizes or different center neck joints will be quoted upon request.

 
Center Neck
Joint
 
Center Neck
Joint
-01 500ml
24/40
-04 1000ml
34/45
-02 500ml
34/45
-05 2000ml
24/40
-03 1000ml
24/40
 
RG6250
FLASK, BOILING, 4-NECKS
Round bottom with 3 24/40 joints. The fourth neck is at a 90° angle to the 3 in-line necks. Side necks have a 24/40 joint. Prices on 12,000ml, 22,000ml and 50,000ml flasks will be quoted on request.

 
Center Neck
Joint
 
Center Neck
Joint
-01 500ml
24/40
-07 1000ml
45/50
-02 500ml
34/45
-08 2000ml
34/40
-03 500ml
45/50
-09 2000ml
45/50
-04 1000ml
24/40
-10 3000ml
29/42
-05 1000ml
29/42
-11 3000ml
45/50
-06 1000ml
34/45
-12 5000ml
45/50
 
RG6300
FLASK, ERLENMEYER WITH NARROW MOUTH, BEADED TOP AND CAPACITY SCALE
For general laboratory usage, these flasks are both economical and versatile.

Capacity
Fits Rubber Stopper #
-01
25ml
0 - 12/pk
-02
50ml
1 - 12/pk
-03
125ml
5 - 12/pk
-04
250ml
6 - 12/pk
-05
300ml
6 - 12/pk
-06
500ml
7 - 6/pk
-07
1000ml
9 - 6/pk
-08
2000ml
10 - 4/pk
-09
4000ml
10 - 1/pk
-10
6000ml
10 - 1/pk
RG6301
FLASK, ERLENMEYER - ECONOMY GRADE
Smooth heavy rim and sturdy wall thickness. Standard stopper size printed on flask.

-01 125ml 12/SP
-02 250ml 12/SP
-03 500ml 6/SP
-04 1000ml 6/SP
-05 2000ml Discontinued
 
RG6305
FLASK, ERLENMEYER, WIDE MOUTH, CHIP RESISTANT
Wide mouth necks are tooled to resist chipping and to accommodate rubber stoppers.

Capacity
Fits Rubber Stopper #
-01
250ml
8 - 12/pk
-02
500ml
10 - 6/pk
-03
1000ml
11 - 6/pk
-04
2000ml
13 - 4/pk
RG6310
FLASK, ERLENMEYER
For a variety of applications requiring good mechanical strength with thermal resistance as well.

With 24/40
-01
50ml
6/pk
-02
125ml
6/pk
-03
250ml
6/pk
-04
300ml
Discontinued
-05
500ml
6/pk
-06
1000ml
6/pk
-07
2000ml
1/pk
With 29/42
-08
500ml
6/pk
-09
1000ml
6/pk
-10
2000ml
1/pk
 
RG6311
FLASK, ERLENMEYER
28/15 socket top.

-01 50ml -05 300ml
-02 125ml -06 1000ml
-03 250ml -07 2000ml
-04 300ml    
RG6315
FLASK, ERLENMEYER GLASS STOPPER
With neck sizes to accommodate stoppers.

-01
25ml w/ #16 stopper
12/cs
-02
50ml w/ #19 stopper
12/cs
-03
125ml w/ #22 stopper
12/cs
-04
250ml w/ #27 stopper
12/cs
-05
500ml w/ #32 stopper
8/cs
-06
1000ml w/ #32 stopper
6/cs
 
RG6400
FLASK, HEAVY WALL FILTERING
With side hose connection, and neck is tooled to accommodate rubber stopper.

Capacity
Fits Rubber Stopper #
-01
250ml
6
-02
500ml
7
-03
1000ml
8
-04
2000ml
9
-05
4000ml
12
RG6401
FLASK, FILTER WITH TUBULATION - ECONOMY GRADE
Heavy walled, thick rims and sturdy hose connection. Stopper size printed on flask.

-01 250ml
-02 500ml
-03 discontinued

 
RG6405
FLASK, HEAVY WALL FILTERING WITH
JOINT
With side hose connection and outer joint.

WITH 24/40: WITH 29/42:
-01 250ml
-02 500ml
-03 1000ml
-04 2000ml
-05 250ml
-06 500ml
-07 1000ml
-08 2000ml
WITH 45/50: WITH 55/50:
-09 2000ml -10 2000ml
RG6420
FLASK, FUSEL OIL DETERMINATION - KJELDAHL SHAPE
Total capacity is 133ml (100ml in bulb and 33ml in neck).
 
RG6450
FLASK, KJELDAHL, ROUND BOTTOM, LONG NECK
With reinforced bead at top. The 500ml and 800ml have tooled necks to reduce breakage.

-01
100ml
6/pk
-02
500ml
6/pk
-03
800ml
6/pk
RG6455
FLASK, KJELDAHL SHAPED
A newer design flask with the conventional round bottom plus tapered upper portion for easy recovery of reaction products.

WITH 24/40 JOINT:
WITH 29/42 JOINT:
-01 50ml -06 100ml
-02 100ml -07 200ml
-03 200ml -08 500ml
-04 500ml -09 1000ml
-05 1000ml    
 
RG6460
FLASK, KJELDAHL SHAPED WITH
INNER JOINT
A newer design flask with an inner joint for use where grease contamination is undesirable. Conventional round bottom, plus tapered upper portion for each recovery of reaction products.

WITH 24/40 JOINT:
WITH 29/42 JOINT:
-01 50ml -06 100ml
-02 100ml -07 200ml
-03 200ml -08 500ml
-04 500ml -09 1000ml
-05 1000ml    
RG6600
FLASKS, VOLUMETRIC, TO CONTAIN,
GLASS STOPPER - CLASS A
Designed from requirements for Type 1, Class A unserialized flask which meets Federal Specification NNN-F-289.

Capacity
Stopper #
-01
5ml
9
-02
10ml
9
-03
25ml
9
-04
50ml
9
-05
100ml
13
-06
200ml
16
-07
250ml
16
-08
500ml
19
-09
1000ml
22
-10
2000ml
27
-20
20ml
9
-30
30ml
9
-60
60ml
13
-80
80ml
13
-150
150ml
16
-300
300ml
19
-400
400ml
19
-3000
3000ml
27
 
RG6601
FLASK, VOLUMETRIC, GLASS STOPPER, CLASS A - ECONOMY GRADE
Made with Duran glass which has a low coefficient expansion. Class A glassware meets Federal Specification NNN-F-289 for Class A, unserialized flasks tolerance limitations.

Capacity
Stopper #
 
-01
5ml
9
6/pk
-02
10ml
9
6/pk
-03
25ml
9
6/pk
-04
50ml
9
4/pk
-05
100ml
13
4/pk
-06
200ml
16
4/pk
-07
250ml
16
4/pk
-08
500ml
19
2/pk
-09
1000ml
22
2/pk
-10
2000ml
27
2/pk
RG6603
FLASK, VOLUMETRIC, CLASS A
Low-actinic Amber, with stopper.

Capacity
 
-01
25ml
6/pk
-02
50ml
4/pk
-03
100ml
4/pk
 
RG6605
FLASK, VOLUMETRIC, POLYETHELENE STOPPER, CLASS A
Similar to RG6600 except with closed-bottom linear high-density polyethelene stopper to fit 3: ground neck. Enlarged top of stopper will protect neck if flask is tipped over.

Capacity
Stopper #
 
-01
5ml
9
12/cs
-02
10ml
9
12/cs
-03
25ml
9
12/cs
-04
50ml
9
12/cs
-05
100ml
13
12/cs
-06
200ml
16
12/cs
-07
250ml
16
12/cs
-08
500ml
19
12/cs
-09
1000ml
22
4/cs
-10
2000ml
27
4/cs
RG6606
FLASK, VOLUMETRIC WITH SNAP CAPS, CLASS A - ECONOMY BRAND
Volumetric flasks made with Duran glass which has a low coefficiency of expansion. Class A glassware meets Federal Specification NNN-F289 for Class A, "unserialized flasks" tolerance limitations. Like our RG6601 except comes with snap caps.

Capacity
Snap Cap #
-01
5ml
1
-02
10ml
1
-03
25ml
2
-04
50ml
3
-05
100ml
3
-06
200ml
4
-07
250ml
4
-08
500ml
5
-09
1000ml
6
 
RG6610
FLASK, VOLUMETRIC HEAVY DUTY, TEFLON® STOPPER, CLASS A
Heavy duty volumetric flask calibrated to contain and supplied with a 3' Teflon~ stopper. Class A glassware meets Federal Specification NNN-F-289 for Class A, unserialized flasks tolerance limitations.

Capacity
Stopper #
-01
10ml
9
-02
25ml
9
-03
50ml
9
-04
100ml
13
-05
200ml
16
-06
250ml
16
-07
500ml
19
-08
1000ml
22
RG6700
FLASK/BEAKER - HEAVY WALL
Like fleakers except thicker walled glass.

-01 150ml
-02 300ml
-03 500ml
-04 750ml

 

 

Funnels
     
RG6850
FUNNEL, POWDER WITH CURVED DRAIN TUBE
Duncan type funnel for use with liquid/liquid extractor.
 

RG6855
FUNNEL, FILL, 58&186; ANGLE, SHORT STEM
Designed from ASTM specification E1095, type 1, Class A requirements.

Apx. ID of Top of Funnel
Apx. Length of Stem
Case Size
-01
25mm
40mm
24/cs
-02
35mm
50mm
24/cs
-03
45mm
50mm
24/cs
-04
55mm
63mm
48/cs
-05
65mm
63mm
48/cs
-06
75mm
75mm
48/cs
-07
90mm
97mm
24/cs
-08
100mm
97mm
24/cs

RG6860
FUNNEL, POWDER
Short, wide stem. Designed from ASTM specification E1095, type 4 requirements.

Apx. ID of Top of Funnel
Apx. OD of Stem
Apx. Length of Stem
Case Size
-01
60mm
13mm
35mm
24/cs
-02
80mm
15mm
35mm
24/cs
-03
100mm
18mm
35mm
24/cs
-04
125mm
19mm
35mm
12/cs
-05
150mm
19mm
35mm
12/cs
 

RG6871
FUNNEL, SEPARATORY
Addition sep. funnel with stopper and Teflon® s/c.

-01 30ml
-02 60ml
-03 125ml
-04 250ml
-05 500ml
-06 1000ml
-07 2000m

RG6900
FUNNEL ONLY, SQUIBB TYPE Replacement for RG6915 without stopper or Teflon® plug.

-01 30ml
-02 60ml
-03 125ml
-04 250ml
-05 500ml
-06 1000ml
-07 2000ml
-08 4000ml
 
RG6901
FUNNEL ONLY
Funnel with Teflon® stopcock.

-01 30ml
-02 60ml
-03 125ml
-04
250ml
-05
500ml
-06
1000ml
-07
2000ml
-08
4000ml
RG6905
FUNNEL, SEPARATORY WITH STOPPER AND STOPCOCK
Pear-shaped with glass stopper and glass stopcock.

Capacity
Stopcock #
Stopper #
-01
30ml
2
13
-02
60ml
2
16
-03
125ml
2
22
-04
250ml
4
22
-05
500ml
4
27
-06
1000ml
4
27
-07
2000ml
6
38
-08
4000ml
6
38
 
RG6910
FUNNEL, SEPARATORY WITH POLYURETHANE STOPPER
Similar to RG6905 except with poly stopper and glass stopcock.

Capacity
Stopcock #
Stopper #
-01
30ml
2
13
-02
60ml
2
16
-03
125ml
2
22
-04
250ml
4
22
-05
500ml
4
27
-06
1000ml
4
27
-07
2000ml
6
38
-08
4000ml
6
38
RG6915
FUNNEL, SEPARATORY WITH TEFLON®
STOPCOCK
Pear-shaped with glass stopper and Teflon® stopcock.

Capacity
Stopcock #
Stopper #
-01
30ml
2
13
-02
60ml
2
16
-03
125ml
2
22
-04
250ml
4
22
-05
500ml
4
27
-06
1000ml
4
27
-07
2000ml
6
38
-08
4000ml
6
38
 

RG6916
FUNNEL, SEPARATORY, ECONOMY

-01 Discontinued
-02
100ml
-03
250ml
-04
500ml
-05
1000ml

RG6920
FUNNEL, SEPARATORY WITH POLYETHYLENE STOPPER
Similar to RG6915 except with poly stopper and Teflon® stopcock.

Capacity
Stopcock #
Stopper #
-01
30ml
2
13
-02
60ml
2
16
-03
125ml
2
22
-04
250ml
4
22
-05
500ml
4
27
-06
1000ml
4
27
-07
2000ml
6
38
-08
4000ml
6
38
 
RG6925
FUNNEL, SEPARATORY WITH TEFLON® STOPPER
Similar to RG6915 except with Teflon® stopper.

Capacity
Stopcock #
Stopper #
-01
30ml
2
13
-02
60ml
2
16
-03
125ml
2
22
-04
250ml
4
22
-05
500ml
4
27
-06
1000ml
4
27
-07
2000ml
6
38
-08
4000ml
6
38
RG6930
FUNNEL, SEPARATORY WITH TREADED TEFLON® VALVE
Threaded Teflon® valve and poly stopper.

Capacity
Stopper #
Stopcock Bore Size
-01
30ml
13
0-4mm
-02
60ml
16
0-4mm
-03
125ml
22
0-4mm
-04
250ml
22
0-4mm
-05
500ml
27
0-4mm
-06
1000ml
27
0-8mm
-07
2000ml
38
0-8mm
 
 
Gas Sampling
     
RG7080
GAS SAMPLING CYANIDE APPARATUS
Absorber has a 29/42 inverted joint. Inner tube will accept different porosity frits with flexible tubing. Base capacity is approximately 175 ml with line at 100 ml mark. Overall height is approximately 200mm. Bottle has 29/42 inner joint. Capacity is about 175 ml. Etched line at the 100 ml mark. Large base, with an overall height of about 240 mm. See RG20840 for replacement frits.

-01 Complete unit
-02 Absorber
-03 Inner tube
-04 Bottle

 

RG7195
GAS SAMPLING FILTER SUPPORT ASSEMBLY
For collecting dust particles and stack sampling system. Available in 3" and 4" size.

-01 With a seat for fritted disc 28/15 ball joint, 3"
-02 With a seat for fritted disc 28/15 ball joint, 4"
-03 With 28/15 socket, bent perpendicular to slow path, 3"
-04 With 28/15 socket, bent perpendicular to slow path, 4"
-05 Filter frit
-06 Filter clamp

RG7196
COARSE FRITS.

-01
2"
-02
3"
-03
4"

 

RG7200
GAS SAMPLING, THREADED FILTER BELL
Same as RG7195 except in place of ball joints, it is threaded for attaching probe, etc.

-01 With a seat for fritted disc, 3"
-02 With a seat for fritted disc, 4"
-03 Bent perpendicular to slow path, 3"
-04 Bent perpendicular to slow path, 4"

RG7201
GAS SAMPLING THREADED IMPINGER BOTTLE WITH THREADED STEMS
Bottle and inner stem comes with threaded end for connection. For use in Gas Train.

-01 With plain end, complete
-02 With 2-1/2mm ID tip, complete
-03 Plain end inner tube
-04 Inner tube 2-12mm ID tip
-05 Bottle only
-06 Impinger bottle with 28/12 O ring ball jt

   

RG7202
GAS SAMPLING, THREADED IMPINGER BOTTLE
With 28/15 ball joints or O ring ball joints.

-01 Complete with 28/15 ball joints
-02 Complete with O ring ball joints
-03 Bottle with 28/15 ball joint
-04 Bottle with O ring ball joint
-05 Stem without orifice tip
-06 Stem with orifice tip
-07 Cap for bottle

RG7204
FILTER CLAMPS

-01 3"
 
RG7220
GAS SAMPLING IMPINGER, WITHOUT PLATE
With 45/50 ground joints, graduated or ungraduated, plain tops used in an impinger train to collect gases and particles from air to other gases. Center tube ID is approximately 1/2" (13mm) above the bottom inside surface. Bottle is 500 ml plain or with graduations. Graduations are 100, 250 and 500 ml.

-01 Complete unit with graduated bottle
-02 Complete unit with ungraduated bottle
-03 Graduated bottle only
-04 Ungraduated bottle only
-05 Stopper only for either bottle
RG7221
GAS SAMPLING IMPINGER, GREENBURG-SMITH, MODIFIED
Graduated or ungraduated,
stopper with ball joints, either 17/9 or 28/15, without impinger plate. Bottle is 500 ml with a 45/50 neck.

-01 Complete unit with graduated bottle,
18/9 ball joint
-02 Complete unit with graduated bottle, 28/15 ball joint
-03 Complete unit with ungraduated bottle,18/9 ball joint
-04 Complete unit with ungraduated bottle, 28/15 ball joint
-05 Graduated bottle only
-06 Ungraduated bottle only
-07 Stopper only, 18/9 for either bottle
-08 Stopper only, 28/15 for either bottle

 
RG7222
GAS SAMPLING IMPINGER, GREENBURG-SMITH, MODIFIED
Same as RG7221 but without O ring ball joint and O ring neck.
RG7225
GAS SAMPLING IMPINGER, WITH PLATE, WITH 45/50 GROUND JOINTS, GRADUATED OR UNGRADUATED
For determination of dust concentration in air or other gases by high velocity impingement separation. Bottle is 500ml plain or graduated. Graduations are: 100, 250, and 500ml

-01 Complete unit with graduated bottle
-02 Complete unit with ungraduated bottle
-03 Graduated bottle only
-04 Ungraduated bottle only
-05 Stopper only for either bottle

 
RG7226
GAS SAMPLING GREENBURG-SMITH IMPINGER, WITH PLATE, WITH 45/50 GROUND JOINTS
Graduated or ungraduated
The arms of the inlet and outlet tubes are equipped with either 18/9 or 28/15 ball joints. Bottle is 500ml plain or graduated. Graduations are at 100, 250, 500ml.

-01 Complete unit with graduated bottle,
18/9 ball joints
-02 Complete unit with graduated bottle,
28/15 ball joint
-03 Complete unit with ungraduated bottle,
18/9 ball joints
-04 Complete unit with ungraduated bottle, 28/15 ball joints
-05 Graduated bottle only
-06 Ungraduated bottle only
-07 Stopper only with 18/9 ball joints
-08 Stopper only with 28/15 ball joints

RG7227
GAS SAMPLING IMPINGER, WITH INVERTED JOINT, GRADUATED OR UNGRADUATED
Same as RG7226 except O ring ball joints.
 
RG7230
GAS SAMPLING IMPINGER, WITH INVERTED JOINT, GRADUATED OR UNGRADUATED
Used for determination of dust concentration in air and other gases.
Joint is reversed. No plate or stopper. Bottle is 500 ml, plain or graduated.

-01 Complete unit with graduated bottle
-02 Complete unit with ungraduated bottle
-03 Graduated bottle
-04 Ungraduated bottle
-05 Stopper
RG7231
GAS SAMPLING IMPINGER, WITH INVERTED JOINT, GRADUATED OR UNGRADUATED
A high velocity impinger for the determination of dust concentration in air or other gases. The 45/50 center joint is reversed from what is normally found on the Greenburg-Smith. Stopper is offered without impinging plate and with 28/15 ball joints. Bottle capacity is 500 ml.

-01 Complete unit with graduated bottle
-02 Complete with ungraduated bottle
-03 Graduated bottle only
-04 Ungraduated bottle only
-05 Stopper with 28/15 ball joints only
 
RG7235
GAS SAMPLING IMPINGER, WITH INVERTED JOINT, GRADUATED OR UNGRADUATED
Used for determination of dust concentration in air and other gases.
45/50 center joint is reversed. With impinging plate at bottom of stopper stem. Bottle capacity is 500 ml.

-01 Complete unit with graduated bottle
-02 Complete unit with ungraduated bottle
-03 Graduated bottle only
-04 Ungraduated bottle only
-05 Stopper only
RG7236
GAS SAMPLING IMPINGER, WITH INVERTED JOINT, GRADUATED OR UNGRADUATED
A high velocity impinger for the determination of dust concentration in air or other gases. The 45/50 center joint is reversed from what is normally found on the Greenburg-Smith. Stopper is offered with impinging plate and with 28/15 ball joints. Bottle capacity is 500 ml.

-01 Complete unit with graduated bottle
-02 Complete unit with ungraduated bottle
-03 Graduated bottle only
-04 Ungraduated bottle only
-05 Stopper only
 
RG7240
GAS SAMPLING MIDGET IMPINGER, 30ml

Calibrated in 5 ml subdivisions,
24/40 joint. Used to collect samples of pollutants in air.

-01 Complete with graduated bottle, 30ml
-02 Complete with ungraduated bottle, 30ml
-03 Graduated bottle, 30ml
-04 Ungraduated bottle, 30ml
-05 Stopper only for 30ml

RG7241
GAS SAMPLING MIDGET IMPINGER WITH BALL JOINTS, 30ML

Similar to RG7240 except the inlet and outlet tubes have 12/5 ball joints at the ends. Bottle has 24/40 joints.

-01 Complete with graduated bottle, 30ml
-02 Complete with ungraduated bottle, 30ml
-03 Graduated bottle only, 30ml
-04 Ungraduated bottle only, 30ml
-05 Stopper only, 30ml
 
RG7242
GAS SAMPLING MIDGET IMPINGER WITH FRITTED INLET TUBE, 30ml
Similar to RG7240 but with the nozzle being replaced with an extra coarse porosity cylindrical frit. Stoppers have plain tubulations. Bottle IS graduated with 24/40 joints.

-01 Complete unit, 30ml
-02 Bottle only, 30ml
-03 Stopper only, 30ml

RG7245
GAS SAMPLING MIDGET IMPINGER, MODIFIED
Stopper is modified with 12/5 joints, both vertical. Nozzle is cut off. Bottle joint is with graduations from 0 to 25 ml divisions.

-01 Complete with 12/5 ball joint on inlet and outlet tubes
-02 Complete with 12/5 socket joint on inlet tube and 12/5 ball joint on outlet tube
-03 Stopper only with 12/5 ball joint on inlet and outlet tubes
-04 Stopper only with 12/5 socket joint on inlet tube and 12/5 ball joint on outer tube
-05 Bottle only
 
RG7246
GAS SAMPLING MIDGET IMPINGER, MODIFIED
Similar to RG7245 but with nozzle being calibrated to deliver 0.09 to 0.11 CFM at 30.5cm.

-01 Complete with 12/5 ball joint on inlet and outlet tubes
-02 Complete with 12/5 socket joint on inlet tube and 12/5 ball joint on outlet tube
-03 Stopper only with 12/5 ball joint on inlet and outlet tubes
-04 Stopper only with 12/5 socket joint on inlet tube and 12/5 ball joint on outer tube
-05 Bottle only

 

RG7480
GAS SAMPLING, MANIFOLD
Unit consists of capillary tubing and one T-bore glass plug with three straight plugs. Distance from end to T-bore is 95mm, from T-bore to first straight bore stopcock is 37mm; 51 mm between straight stopcocks; and 70mm between the last stopcock and the end outlet. Overall length is approximately 302mm. Capillary tubing is 2mm ID x 6.5 - 7mm OD.
 
RG7481
GAS SAMPLING, MANIFOLD Similar to RG7480 except with Teflon® Plugs.
RG7485
GAS SAMPLING, MANIFOLD, GLASS PLUGS Similar to RG7480 except with four straight bore stopcocks.
 
RG7486
GAS SAMPLING, MANIFOLD, TEFLON® PLUGS
Similar to RG7480 except with four straight bore stopcocks.
RG7520
GAS SAMPLING, NOZZLE
Stack nozzle with 19/38 joint. Made to attach to probe liner. Made with either borosilicate or clear fused quartz.

BOROSILICATE QUARTZ
-01 1/4"
-02 3/8"
-03 1/2"
-04 3/4"
-05 7/16"
-06 1/4"
-07 3/8"
-08 1/2"
-09 3/4"
-10 7/16"
 
RG7521
Nozzles.

-01 Nozzle .125 1/8"
-02 Nozzle .250 1/4"
-03 Nozzle .3125 5/16"
-04 Nozzle .375 3/8"
-05 Nozzle .4375 7/16"
-06 Nozzle .5 1/2"
-07 Nozzle .1875 3/16"
RG7559
GAS SAMPLING PROBE LINER
Borosilicate, 5/8" heavy wall, ends squared and beveled.

-01 4ft.
-02 5ft.
-03 6ft.
-04 7ft.
-05 8ft.
-06 9ft.
-07 10ft.
-08 11ft.
-09 12ft.
-10 13ft.
 
RG7600
GAS SAMPLING PROBE LINER
Used in particulate or stack gas sampling. Borosilicate 5/8" heavy wall tubing. Has either 18/9 or 28/15 ball joint. Also available in quartz.

Length
Joint Size
Length
Joint Size
-01
2ft
18/9
-11
5ft
28/15
-02
3ft
18/9
-12
6ft
28/15
-03
4ft
18/9
-13
7ft
28/15
-04
5ft
18/9
-14
8ft
28/15
-05
6ft
18/9
-15
9ft
28/15
-06
7ft
18/9
-16
10ft
28/15
-07
8ft
18/9
-17
11ft
28/15
-08
2ft
28/15
-18
12ft
28/15
-09
3ft
28/15
-19
13ft
28/15
-10
4ft
28/15
-20
14ft
28/15
RG7601
GAS SAMPLING PROBE LINER
For use with gas sampling nozzle.
19/38 inner joint with hooks.

Length
Joint Size
Length
Joint Size
-01
2ft
18/9
-11
5ft
28/15
-02
3ft
18/9
-12
6ft
28/15
-03
4ft
18/9
-13
7ft
28/15
-04
5ft
18/9
-14
8ft
28/15
-05
6ft
18/9
-15
9ft
28/15
-06
7ft
18/9
-16
10ft
28/15
-07
8ft
18/9
-17
11ft
28/15
-08
2ft
28/15
-18
12ft
28/15
-09
3ft
28/15
-19
13ft
28/15
-10
4ft
28/15
-20
14ft
28/15
 
RG7602
GAS SAMPLING PROBE LINER, THREADED FITTINGS
Same as RG7600 except with threaded fittings.

-01
2ft.
-02 3ft.
-03 4ft.
-04 5ft.
-05 6ft.
-06 7ft.
-07 8ft.
RG7740
GAS SAMPLING T-BORE STOPCOCK, GLASS PLUG
With plain horizontal arms; 2mm bore with 24/40 inner joint.
 
RG7741
GAS SAMPLING T-BORE STOPCOCK, GLASS PLUG
For connecting collection flask to probe. Stopcock is 2mm bore.
Has 12/5 ball and socket joint on horizontal arms, and 24/40 inner joint.
RG7760
GAS SAMPLING TUBES WITH CAPILLARY ENDS, 250ml

-01 Glass Stopcock
-02 Teflon® Stopcock
 
RG7761
GAS SAMPLING TUBE WITH GLASS PLUG
With extra sturdy seals at stopcock barrels to minimize possibility of breakage in plant or laboratory with consequent loss of sample. Can be made with either 12/5 or 18/9 ball joints.

 
Capacity
Body OD
Length
Stopcock
Joint
-01
125ml
38mm
300mm
#2
12/5
-02
250ml
51mm
340mm
#4
12/5
-03
500ml
64mm
380mm
#4
12/5
 
-04
125ml
38mm
300mm
#2
18/9
-05
250ml
51mm
340mm
#4
18/9
-06
500ml
64mm
380mm
#4
18/9
RG7762
GAS SAMPLING TUBE WITH TEFLON® PLUG
Similar to RG7761 except the stopcock is fitted with a Teflon® plug. Can either be made with
12/5 or 18/9 ball joint.

 
Capacity
Body OD
Length
Stop
cock
Joint
-01
125ml
38mm
300mm
#2
12/5
-02
250ml
51mm
340mm
#4
12/5
-03
500ml
64mm
380mm
#4
12/5
 
-04
125ml
38mm
300mm
#2
18/9
-05
250ml
51mm
340mm
#4
18/9
-06
500ml
64mm
380mm
#4
18/9
 
RG7765
GAS SAMPLING TUBE WITH GLASS PLUG, SEPTUM NECK, CAPILLARY ENDS
For collection of environmental samples. Stopcock is fitted with glass plug. Septum neck provided for access to gas tight syringe.

 
Capacity
Length
Stopcock
-01
125ml
260mm
#2
-02
250ml
340mm
#3
 
-03
125ml
Teflon® s/c
-04
250ml
Teflon® s/c
RG7770
GAS SAMPLING TUBE WITH GLASS PLUG, SEPTUM NECK
With side outlet in body for a
self-sealing syringe stopper, providing for withdrawal of sample by a syringe. Can be made with either
12/5 or 18/9 ball joints.

 
Capacity
Length
Stopcock
Joint
-01
125ml
300mm
#2
12/5
-02
250ml
340mm
#4
12/5
-03
500ml
380mm
#4
12/5
 
-04
125ml
300mm
#2
18/9
-05
250ml
340mm
#4
18/9
-06
500ml
380mm
#4
18/9
 
RG7771
GAS SAMPLING TUBE WITH TEFLON® PLUG
Similar to RG7770 except the stopcock is fitted with a Teflon® plug.

 
Capacity
Length
Stopcock
Joint
-01
125ml
300mm
#2
12/5
-02
250ml
340mm
#4
12/5
-03
500ml
380mm
#4
12/5
 
-04
125ml
300mm
#2
18/9
-05
250ml
340mm
#4
18/9
-06
500ml
380mm
#4
18/9

Gas Washing
     
RG7880
GAS WASHING BOTTLE, DRECHESEL, TALL FORM
With medium length stopper. Supplied complete with springs. Stopper size is
34/28.

Complete Unit
Bottle Only
Stopper Only
125ml
-01
-04
-07
250ml
-02
-05
-08
500ml
-03
-06
-09
 
RG7885
GAS WASHING BOTTLE, FRITTED
Same as RG7880 but supplied with a fritted stopper of either coarse or extra coarse porosity. Complete with springs. Stopper size is 34/28.

Complete Unit
Bottle Only
Coarse Stopper Only
Extra Coarse Stopper Only
125ml
-01
-04
-07
-10
250ml
-02
-05
-08
-11
500ml
-03
-06
-09
-12
RG7886
GAS WASHING BOTTLE, FRITTED WITH INVERTED JOINT
Same as RG7885 but with inverted joint. Supplied with a fritted stopper of either coarse or extra coarse porosity. Complete with springs. Stopper size is 34/28.

Complete Unit
Bottle Only
Coarse Stopper Only
Extra Coarse Stopper Only
125ml
-01
-04
-07
-10
250ml
-02
-05
-08
-11
500ml
-03
-06
-09
-12
 
RG7890
GAS WASHING BOTTLE, FRITTED DISC
With cap style stopper. Inlet tube has a coarse porosity disc which is at a 15º angle. Supplied complete with springs. Stopper size is 45/50.

Complete Unit
Bottle Only
Coarse Stopper Only
Extra Coarse Stopper Only
125ml
-01
-04
-07
-10
250ml
-02
-05
-08
-11
500ml
-03
-06
-09
-12
laboratory glass about us contact us
Website Design by Barrier Media, LLC.