Laboratory Glass A-B

Adapters - Beakers - Bottles - Bubblers - Bulbs - B.O.D. Bottles - Burets
Adapters
     
RG1000
ADAPTER, 105º angle socket top and ball bottom.

-01 28/15
-02 35/25
 
RG1001
ADAPTER, 105º angle joints.

-01 19/38
-02 24/40
-03 29/42
RG1040
ADAPTER, bushing style with
full length outer and inner joints.
 
outer joint
inner joint
-01
29/42
24/40
-02
45/50
24/40
-03
45/50
29/42
-04
19/38
10/30
-05
34/45
29/42
-06
24/40
19/38
 
RG1080
ADAPTER, Claisen 3-Way
with parallel sidearm, outer joints at top, inner joint at buttom.

-01 24/40
-02 29/42

RG1090
ADAPTER, connecting, 75º angle with inner joint at both ends.

-01 24/40
-02 29/42
 
RG1091
ADAPTER, connecting, 75º sidearm with outer joint at top, and inner joints at side and bottom.

-01 24/40
-02 29/42

RG1100
ADAPTER, connecting, distance between joints is 200mm. Both inner joints.

-01 24/40
-02 29/42
 
RG1101
ADAPTER, connector,
the upper joint is 10/30 for thermometer. Both lower joints are 24/40. Sidearm is approximately 75º.
RG1120
ADAPTER, distilling, 75º angle sidearm for connecting distilling column with vertical condensors. Top is a 10/30 joint for 76mm immersion thermometer.

-01 24/40 Side and bottom
-02 29/42 Side and bottom
 
RG1130
ADAPTER, distilling, 105º angle, outer with the small tube bent at an angle of 105º and cut to a drip tip.

-01 24/40
-02 29/42

RG1160
ADAPTER, ENLARGING
Top outer joint larger than bottom inner joint.

-01 24/40 outer, 10/30 inner
-02 29/42 outer, 10/30 inner
-03 24/40 outer, 12/30 inner
-04 29/42 outer, 12/30 inner
-05 24/40 outer, 14/35 inner
-06 24/40 outer, 19/38 inner
-07 45/50 outer, 19/38 inner
-08 40/50 outer, 24/40 inner
-09 45/50 outer, 24/40 inner
-10 45/50 outer, 29/42 inner
-11 55/50 outer, 45/50 inner
 
RG1200
ADAPTER, flow control, 90º with hose connection and Teflon® stopcock or and stopcock has a 2mm bore.

-01 24/40
-02 29/42
-03 28/15
-04 35/25
RG1201
ADAPTER, flow control, 90º with hose connection and glass stopcock or and stopcock has a 2mm bore.

-01 24/40
-02 29/42
-03 28/15
-04 35/25
 
RG1300
ADAPTER, inlet, outlet
inner or ball joint . Hose connection has a diameter of 1Omm at the largest serration. Please specify joint type.

-01 24/40
-02 29/42
-03 18/9
-04 28/15
-05 35/25
RG1301
ADAPTER, INLET, OUTLET
Similar to RG1300 but with a outer or a socket joint instead of a inner or a bail joint. Please specify joint type.

-01 24/40
-02 29/42
-03 1 8/9
-04 28/15
-05 35/25
-06 19/38
 
RG1302
ADAPTER, INLET, OUTLET
Hose connection at 90º from or. Please specify joint type.

-01 24/40
-02 29/42
-03 18/9
-04 28/15
-05 35/25
RG1303
ADAPTER, INLET, OUTLET
Inner Joint ending in a tubing connector at right angle.

-01 1 9/38
-02 24/40
-03 29/42
 
RG1304
ADAPTER, INLET
inner joint ending in a tubing connector at right angle with an inlet tube

-01 24/40
RG1440
ADAPTER, LIQUID/LIQUID
Has a 45/50 outer top, 24/40 inner bottom,
35/25 ball joint at side.
 
RG1680
ADAPTER, REDUCING with full length top and bottom.

 
Outer
Top
Inner Bottom
Outer Top
Inner Bottom
-01
19/38
24/40
-09
55/50
71/60
-02
19/38
45/50
-10
45/50
55/50
-03
24/40
40/50
-11
10/30
24/40
-04
24/40
45/50
-12
24/40
34/45
-05
29/42
45/50
-13
45/50
60/50
-06
34/45
45/59
-14
24/40
29/42
-07
24/40
55/50
-15
24/40
60/50
-08
45/50
103/60
RG1760
ADAPTER, THERMOMETER
24/40 joints at side and bottom with a plain tube for thermometer at top.
 


RG1840
ADAPTER, VACUUM 105º
Outside joint at 105º angle with side hose connection for vacuum connection.

-01
24/40
-02 29/42

RG1841
ADAPTER, VACUUM
24/40 top joint with side hose connection and drip tip.

 

TOP
Beakers  
 
RG2160
BEAKER, GRIFFIN, LOW FORM WITH CAPACITY SCALE
Thick, slightly flared bead top with spout designed to have excellent pouring characteristics and uniform walls throughout. All sizes have durable matte finish marking area for use with ordinary pencil. Easy to read white graduated scale is provided for measuring and/or mixing liquidS where high accuracy is not required. Capacity is approximately
+I- 5%.

-01 50ml 48/cs 12/pk
-02 100ml 48/cs 12/pk
-03 150ml 48/cs 12/pk
-04 250ml 48/cs 12/pk
-05 400ml 48/cs 12/pk
-06 600ml 36/cs 6/pk
-07 800ml 24/cs 6/pk
-08 1000ml 24/cs N/A
-09
1500ml 16/cs 4/pk
-10
2000ml 8/cs 4/pk
-11
4000ml 6/cs 1pk
 
RG2161
BEAKER, BOROSILICATE - ECONOMY GRADE
White permanent graduations and large marking square, Heavy wall construction. Accuracy 5% of total capacity.

-01 50ml 192/cs 12/pk
-02 100ml 192/cs 12/pk
-03 150ml 192/cs 12/pk
-04 250ml 96/cs 12/pk
-05 400ml 48/cs 12/pk
-06 600ml 48/cs 6/pk
-07 800ml 48/cs 6/pk
-08 1000ml 24/cs 6/pk
-09
1500ml 16/cs 4/pk

 

RG2165
BEAKER, HEAVY-DUTY, LOW FORM, WITH CAPACITY SCALE
Thick uniform walls throughout and with extra wall thickness built into evenly tooled top rim. Spout designed for optimum performance. Heavy construction is intended to prolong life expectancy with harder than normal usage (i.e. mechanical shock). All sizes have durable matte finish marking area and white graduated scale. Designed from ASTM specification E960, type 11 requirements.

-01 250ml 48/cs
-02 400ml 48/cs
-03 600ml 36/cs
-04 1000ml 24/cs
-05 2000ml 8/cs
-06 4000ml 4/cs
 
RG2170
BEAKER-MUG, SIX PACK AND PITCHER
400ml six-pack and matching 2 Liter pitcher for lab use. Handle makes an ordinary beaker easier to use. We can also apply your logo. Prices available on request.

-01 Beaker mug, 400ml
-02 2 Liter pitcher
TOP
Bottles  
 
RG2500
BOTTLE, B.O.D., 300ML, WITH GLASS STOPPER
These bottles conform to ASTM E438. Type 1, Class B Borosilicate Glass. The design incorporates a flared mouth used to form a water seal. Stopper design uses conical extension to displace excess sample which further insures no air entrapment in sample. Specifications: 69mm diameter x 165 mm height; neck l.D. approx. 16.7 mm


Number Sequence Case Qty
-01 Un-numbered 24
 
RG2501
BOTTLE ONLY, B.O.D, 300ML
Number Sequence Case Qty
-01 Un-numbered 24
RG2502
B.O.D. STOPPER SNAP-LID
Snap-lid holds stopper secure in B.O.D. bottle over flared mouth and reduces evaporation of water seal during incubation. 50 per case.
RG2503
B.O.D. Bottle aerator, stopper head
RG2560
BOTTLE, CENTRIFUGE WIDE MOUTH, 250ml
Same as standard centrifuge bottle except no constriction at opening.
TOP
Bubblers  
 

RG2800
BUBBLER, RADON
With 18/9 ball and socket joints and separate stopcock. Frit disc can be medium or coarse, please specify which disc is preferred.

-01 Complete with Teflon® stopcock
-02 Complete with glass stopcock
-03 Teflon® stopcock only
-04 Glass stopcock only
-05 Teflon® body only
-06 Glass body only

 
RG2801
BUBBLER, RADON with 10/30 FILL TUBE AND SEPARATE STOPCOCK: MEDIUM FRIT DISC
Please specify if other than medium porosity disc wanted.

-01 Complete with Teflon® stopcock
-02 Complete with glass stopcock
-03 Teflon® stopcock only
-04 Glass stopcock only
-05 Teflon® body only
-06 Glass body only

RG2802
BUBBLER, RADON
One piece with 25mm OD reservoir, medium frit.
Please specify if other than medium porosity frit wanted.

-01 Teflon® stopcock
-02 Glass stopcock

 
RG2810
BUBBLER, SMOG
Choice of either fritted tip or plain orifice stopper. Bottle has 24/40 and 100mm tube below bulb. Inlet arm has 12/5 ball and socket on outlet. Fritted tip coarse porosity. Plain tip 1mm Capillary.

-01
Fritted tip
-02 Plain tip

-03 Fritted tip, straight stem instead of ball & socket

-04 Plain tip, straight stem instead of ball & socket
TOP
Bulbs  
 
RG2720
BULB, KJELDAHL CONNECTION TYPE
These bulbs have a curved inner tube sealed to the upper arm.

-01
Diameter of bulb is 52mm/ upper tube approx. 12mm/ lower tube approx. 9mm
-02 Diameter of bulb is 65mm/ upper tube approx. 12mm/ lower tube approx. 9mm
 
RG2725
BULB, KJELDAHL CONNECTING, CYLINDRICAL TYPE
These bulbs have two curved inner tubes sealed at the top and bottom. The lower inside tube has an opening near the seal to permit trapped condensate to drain into the flask.

-01 Approx. body OD x Length is 46 x 100mm - Approx. upper and lower tube size is 12mm each
-02 Approx. body OD x Length is 54 x 100mm - Approx. upper and lower tube size is 12mm each
B.O.D. Bottles  
 
RG2500
BOTTLE, B.O.D., 300ML, WITH GLASS STOPPER These bottles conform to ASTM E438. Type 1, Class B Borosilicate Glass. The design incorporates a flared mouth used to form a water seal. Stopper design uses conical extension to displace excess sample which further insures no air entrapment in sample. Specifications: 69mm diameter x 165 mm height; neck l.D. approx. 16.7 mm
Number Sequence Case Qty
-01 Un-numbered 24
-02 01-24 24
-03 25-48 24
-04 49-72 24
-05 73-96 24
-06 97-120 24
-07 121-144 24
-08 145-168 24
-09 169-192 24
-10 193-216 24
-11 217-240 24
 
RG2501
BOTTLE ONLY, B.O.D, 300ML

Number Sequence Case Qty
-01 Un-numbered 24
-02 01-24 24
-03 25-48 24
RG2502
B.O.D. STOPPER SNAP-LID
Snap-lid holds stopper secure in B.O.D. bottle over flared mouth and reduces evaporation of water seal during incubation. 50 per case.
 
RG2560
BOTTLE, CENTRIFUGE WIDE MOUTH, 250ml
Same as standard centrifuge bottle except no constriction at opening.
TOP
Burets  
 
RG2900
BURET
Laboratory grade with beaded top and hose connection at bottom, Graduation is a durable white enamel.
  Capacity Sub-Div
-01 10ml 0.1ml
-02 25ml 0.1ml
-03 50ml 0.1ml
-04 100ml 0.2ml
 
RG2901
BURET, GLASS STOPCOCK
Laboratory grade, straight, with white durable graduation and #2 stopcock.
  Cap. Sub-Div Tolerance +/-
-01 10ml 0.05ml 0.04ml
-02 25ml 0.1ml 0.06ml
-03 50ml 0.1ml 0.10ml
-04 100ml 0.2ml 0.20ml


RG2902
BURET, TEFLON® STOPCOCK
Laboratory grade, straight, with white durable graduation and #2 stopcock.
  Cap. Sub-Div Tolerance +/-
-01 10ml 0.05ml 0.04ml
-02 25ml 0.1ml 0.06ml
-03 50ml 0.1ml 0.10ml
-04 100ml 0.2ml 0.20ml
 
RG2903
BURET, DISPENSING
Laboratory grade, with hose connection for rubber delivery tip assembly.
  Cap. Sub-Div Tolerance +/-
-01 250ml 1ml 2.0ml
-02 500ml 5ml 2.5ml
-03 1000ml 10ml 5.0ml
RG2910
BURET, TEFLON® STOPCOCK, CLASS B - economy grade
  Cap. Tolerance +/-
-01 25ml 0.06
-02 50ml 0.10
-03 100ml 0.20

 

 
RG2911
BURET, TEFLON® STOPCOCK, CLASS A - economy grade
  Cap. Tolerance +/-
-01 10ml 0.02
-02 25ml 0.05
-03 50ml 0.05
-04 100ml 0.10
RG2920
BURET, GLASS STOPCOCK, CLASS A
Precision grade, straight, with white graduation and #2 stopcock.
  Cap. Sub-Div Tolerance +/-
-01 10ml 0.05ml 0.02ml
-02 25ml 0.1ml 0.03ml
-03 50ml 0.1ml 0.05ml
-04 100ml 0.2ml 0.10ml
 
RG2921
BURET, TEFLON® STOPCOCK, CLASS A
Precision grade, straight, with white graduation and #2 stopcock.
  Cap. Sub-Div Tolerance +/-
-01 10ml 0.05ml 0.02ml
-02 25ml 0.1ml 0.03ml
-03 50ml 0.1ml 0.05ml
-04 100ml 0.2ml 0.10ml
RG2925
BURET, GLASS STOPCOCK
Dispensing, with straight bore stopcock No. 4.
  Cap. Sub-Div Tolerance +/-
-01 250ml 1ml 2.0ml
-02 500ml 5ml 2.5ml
-03 1000ml 10ml 3.0ml
 
RG2926
BURET, TEFLON® STOPCOCK
Dispensing, with straight bore stopcock No. 4.
  Cap. Sub-Div Tolerance +/-
-01 250ml 1ml 2.0ml
-02 500ml 5ml 2.5ml
-03 1000ml 10ml 3.0ml
TOP
RG2935
BURET, ACID, AUTO, GLASS STOPCOCK, CLASS A
Automatic, Precision Grade white graduations. Supplied with bottle and bulb. Complete.
  Cap. ml Sub-Div ml Tolerance ml +/- Bottle Cap. ml
Joint
-01 2 0.02 0.01 1000 24/40
-02 5 0.02 0.01 1000 24/40
-03 10 0.05 0.02 1000 24/40
-04 25 0.10 0.03 1000 24/40
-05 50 0.10 0.05 2000 29/42
-06 100 0.20 0.10 2000 29/42

 
RG2936
BURET, ACID, AUTO, TEFLON® STOPCOCK, CLASS A
Automatic, Precision Grade white graduations. Supplied with bottle and bulb. Complete.
  Cap. ml Sub-Div ml Tolerance ml +/- Bottle Cap. ml
Joint
-01 2 0.02 0.01 1000 24/40
-02 5 0.02 0.01 1000 24/40
-03 10 0.05 0.02 1000 24/40
-04 25 0.10 0.03 1000 24/40
-05 50 0.10 0.05 2000 29/42
-06 100 0.20 0.10 2000 29/42
RG2950
BURET
Automatic, Student Type, with rubber delivery tip assembly. Complete with bottle, rubber stopper and bulb.
  Capacity Sub-Div Bottle Capacity
-01 10ml .10ml 16oz.
-02 25ml .10ml 32oz.
-03 50ml .10ml 32oz.
 
RG2955
BURET, GLASS STOPCOCK
Automatic, Student Type, with Stopcock No. 2. Complete with bottle, rubber stopper and bulb.
  Capacity Sub-Div Bottle Capacity
-01 10ml .10ml 16oz.
-02 25ml .10ml 32oz.
-03 50ml .10ml 32oz.
RG2956
BURET, TEFLON® STOPCOCK
Automatic, Student Type, with Stopcock No. 2. Complete with bottle, rubber stopper and bulb.
  Capacity Sub-Div Bottle Capacity
-01 10ml .10ml 16oz.
-02 25ml .10ml 32oz.
-03 50ml .10ml 32oz.
  RG2965
BURET, MACHLETT, GLASS STOPCOCK, CLASS A
Automatic, Precision Grade, with white graduations. Stopcock No. 2, Y-bore, enables rapid filling and dispensing. Supplied with drying tube for air intake. Complete.
  Cap. Sub-Div Tolerance +/- Reservoir
-01 2ml 0.02ml 0.01ml 500ml
-02 5ml 0.02ml 0.01ml 1000ml
-03 10ml 0.05ml 0.02ml 1000ml
-04 25ml 0.10ml 0.03ml 2000ml
-05 50ml 0.10ml 0.05ml 2000ml
RG2966
BURET, MACHLETT, 31; TEFLON® STOPCOCK, CLASS A Automatic, Precision Grade, with white graduations. Stopcock No. 2, Y-bore, enables rapid filling and dispensing. Supplied with drying tube for air intake. Complete.
  Cap. Sub-Div Tolerance +/- Reservoir
-01 2ml 0.02ml 0.01ml 500ml
-02 5ml 0.02ml 0.01ml 1000ml
-03 10ml 0.05ml 0.02ml 1000ml
-04 25ml 0.10ml 0.03ml 2000ml
-05 50ml 0.10ml 0.05ml 2000ml
 
 
TOP
laboratory glass about us contact us
Website Design by Barrier Media, LLC